5 Best Lubricant for Skateboard Bearings

Cruises around the street or performing some tricks in the skate park brings ultimate fun to every skater’s life. You can enjoy the thrill of skating till the bearings of your skateboard spin freely. Riding on the street exposes the skate-bearings to mud, debris, water, and dust. 

All of these contaminants start blocking up the bearings. Consequently, your skateboard can’t move because of the stuck bearings. When you observe your skate-bearings don’t roll freely, understand it’s time to take a break from riding and lubricating skateboard bearings. And this guide on Best Lubricant for Skateboard Bearings will help you lube your skate-bearings. 

We enlisted the top 5 lubricants in the market that break down dirt accumulation and let your bearings spin faster. Without further ado, let’s check out what we included on the list

Best 5 Lube for Skateboard Bearings

Here is the list of the best lube for skateboard bearings. All of the lubricants for skate-bearings can remove debris accumulation by freeing up the bearings. However, if you are in a hurry and don’t have enough time to check out the entire list, go for Bones Speed Cream Skate Bearing Lubricant. 

It is specially made and formulated for skateboard bearings. On the other hand, Tri-Flow TF21010 will also perform the best. This low viscosity lube comes with a straw to dispense lubricant into hard-to-reach areas. 

You can also apply it under harsh conditions. Also, you can go for 3-IN-ONE Multi-Purpose Oil Lubricant. It doesn’t only help you lube the skate-bearings also allows you to lubricate hinges, key locks, and more. Now, it’s time to discover all the features & benefits of each of the lubricants we enlisted. So, let’s get started. 

triflow skateboard bearing lubricant

#1

Tri-Flow TF21010 Superior Lubricant with Drip Bottle

TOp Feature

Skating around the streets is a fun activity. But no one loves to skate with a skateboard that troubles to move. The street’s dirt, dust, got into the bearing and jammed it. Consequently, your skateboard will struggle to move because of the stuck bearings. 

To let your bearing spin better, Tri-Flow Superior Lubricant is here to lube your skateboard bearings. This light viscosity lube can go deep into hard-to-reach moving parts. Therefore, it features a convenient straw that helps to let the lube penetrate every inch of your skateboard bearings. 

Apart from these, you can gain optimum lubrication even under extreme temperature and humidity conditions because of its high-grade petroleum oilsThe best feature of this lubricant is it’s formulated solvents. It will free up the stuck bearings by softening and removing dirt, dust, and contaminants. 

Therefore, its special additives will dislodge moisture and can resist rust & corrosion. So, you don’t need to worry about rusty skate bearings no matter how abruptly you skate around the streets. No metal-to-metal friction also will not occur.  Just lube your skateboard bearings regularly with this lubricant.

Though the lubricant keeps bearings dynamic, we recommend you take some precautions when using it. It contains harmful chemicals named Teflon. If it comes to contact your eye or skin, flush thoroughly with water. Don’t forget to use it in a well-ventilated area. 

Pros

cons

#2

Bones Speed Cream Skate Bearing Lubricant

Top Feature

bones skateboard speed cream

Bones Speed Cream Lubricant is the best lubricant on this list as it is specially formulated for skateboard bearings. Applying this lubricant, you can find the bearings spin faster and shield against rust and corrosion. Therefore, it reduces metal friction to ensure a safe and comfortable riding experience. 

The noteworthy feature we spot out is the formulation of this lubricant. It uses low viscosity to formulate this cream which can resist high temperature. You will be impressed by observing how fast it works once you apply it. It performs the best when you clean your bearings. Then, apply two drops onto the balls and race inside each bearing. Give them a little spin between your fingers to spread the lubricant to every part of your skate bearings.

If you clean your bearings after riding with your skate and apply this lube, you will get the maximum speed out of your skate bearings. Above all, it adds longevity and gives a smooth riding experience. 

This lubricant is comparatively lighter than other white lithium greases. So, it won’t last for a long time. However, it will protect your bearings from sand, dirt, and rain as it is formulated for skate bearings. 

Pros

Cons

3 in 1 skateboard lubricant for multipurpose

#3

3-IN-ONE 100355 Multi-Purpose Oil

TOp Feature

Clean off grime, lubricate moving parts, and protects bearings from rust & corrosion! Yes, 3-IN-ONE Multi-purpose Lubricant resembles its name. It comes with a spout extension of more than 6 inches. With it, you can dispense the lube exactly where you need it. You can even apply this lubricant to hard-to-reach moving parts without any overspray. 

Above all, this lubricant can deeply penetrate rust formed into nuts and bolts and loosen them. Then, lubricate those moving parts to reduce friction. 

The remarkable feature we spot out is- its versatility. Besides lubricating skate bearings, you can also lube household stuff like nuts, bolts, hinges, wheels, and other moving parts. This multi-purpose lubricant has a fill level indicator strip to check the remaining level of lube. However, a small bottle of lubricator lasts for a long time. In other words, it saves you money. 

Ease of application is another notable feature we discover. The squeeze bottle design gives complete control over how much lube you will apply.

As we all love our planet, it would be best if the container material is metal instead of plastic.  

Pros

Cons

#4

Super Lube 51004 Synthetic Oil with PTFE

Top Feature

super lube synthetic oil for skateboard and longboard bearings

Skateboard bearings are responsible for moving your skateboard. But, they start squeaking over time as dirt, debris, and rust accumulate your skate bearings. A fresh lubricant will do the trick in this case to kill the squeaky sound. And the Super Lube Synthetic Lubricant will add fuel to the lubricating process. 

It’s a premium synthetic oil with suspended Syncolon particles. In other words, this lube is specially formulated for lubricating industrial machinery. So, greasing your skateboard bearings will be a piece of cake with this oil-based lubricant. The multi-purpose lube from Super Lube provides ultimate protection against wear, rust & corrosion. It helps to reduce friction, make your bearings faster, and increase their durability. 

Before applying it, we recommend you clean your skate bearings thoroughly. Then, lube the bearings with it to put an end to the squeaking. It will let your skateboard bearings roll faster and offer you a smooth riding experience. 

Forget to mention that this is an NSF-registered food-grade lubricant and is friendly to the environment. So, you can use it in and around the food processing area and apply it to food processing equipment. 

Pros

CONS

park tool skateboard grease for skateboard bearing

#5

Park Tool PolyLube 1000 Bicycle Grease

TOp Feature

At the bottom of the list, we bring Park Tool PolyLube 1000 Bicycle Grease for its excellent ability to lube skate bearings. It protects your bearings from metal friction and shields other vital parts under extreme conditions due to its high shear strength.

Like other lubricants on this list, it also can repel moisture and prevent rust & corrosion from forming into the movable parts. So, you don’t need to worry about the rust making your bearings blocked. 

Though this lube is specially formulated for maintaining and repairing bicycle equipment, you can use it for lubricating your skateboard bearings. It will penetrate the dirt, dust, and rust that form into the bearing and loosen them. So, your skate bearings never get stuck and roll faster like the first day you brought it. 

Therefore, the container tip is smooth and lets you dispense the lubricant where you need to apply it. Our only gripe about this lubricant is- it’s a bit expensive compared to other lubes on the list. 

Pros

CONS

Buying Guide: What to Look Before Buying Lubricant for Skateboard Bearings

skate insider

Keeping your skateboard bearings well-lubed is a must. Otherwise, the bearings will start squeaking over time. So, it is recommendable to lube the moving parts of your skate to ensure safety and smooth riding. But the heck is- you can find thousands of lubricants in the market. Picking the right one from there is challenging. However, considering the following criteria will help you to choose the best skateboard bearing lube. 

Can resist rust & corrosion or not

First off, choose a lubricant that offers ultimate protection against rust & corrosion. Every lubricant we reviewed can prevent rust from forming. For example, Tri-Flow TF21010 Superior Lubricant has special additives to displace moisture and can resist rust & corrosion optimally. 

Easy to Apply or Not

The ease of application of the lubricant also matters a lot. Get a lubricant that comes with a straw or spout extension to apply the lube where you need it. Otherwise, you can’t penetrate the hard-to-reach areas and fail to dispense the lubricant optimally. Consequently, you fail to lube the moving parts of your skateboard, which fails to reduce the friction. So, choose the lubricator that comes with a small applicator.

Consider the type of lubricant

You can find three different types of lubricants in the market. They are oil, grease, and dry lubricants. Each lubricant type has its upsides and downsides. For example, oil-based lubricants prevent dirt, debris, and contaminants from coming into the bearings. Therefore, you can optimally control the volume of oil or relubrication. On the other hand, grease-based lubricant stays on your moving parts longer compared to oil-based formula. But it attracts debris and dust. 

And lastly, the dry-lubricant is specially formulated for deep cleaning & lubrication. We recommend you pick the oil-based lubricant, especially synthetic oil lube. You can use this one under extreme environmental conditions. 

Viscosity

You should consider the viscosity if you choose oil-based lubricant. It’s the resistance to flow at a certain temperature. A lubricant with lower viscosity flows readily compared to the higher & thicker viscosity. We recommend you choose a low viscosity lubricant for its ability to endure extreme temperatures. Also, it efficiently lubes the bearings by resisting rust. 

Bottle Material

It’s mandatory if you want to protect your bearing without damaging the earth. Most of the lubricant bottles are made of plastic, which is not friendly to the environment. Regarding this, picking the metal lubricant can be your best trait. lubricating skateboard wheels bearing

FAQs

Why do you need a skateboard-bearing lube?

A skateboard-bearing lube will free up your bearings by getting rid of dust, debris, and sand. If you don’t use lubricant, that stuff will block your bearings and make your skate unmovable. In the worst case, it will bring damage to your skateboard or you will encounter an accident. That’s why you need lubricant for skateboard bearings to lube them to let the bearings roll faster. 

What can I use to lubricate skateboard bearings?

You can find oil, grease, and sewing machine oil to lubricate your skateboard bearings.

What are the different types of lubricants for skateboard bearings?

Oil-based lubricants, grease, and dry lubricants are some examples of lubricants you can use to lubricate your skate bearings.

What are the most trusted skateboard bearing lubricant brands?

Tri-Flow, 3-IN-ONE, Super Lube, Bones Speed, and Liberty are some of the most trusted and reliable skateboard bearing lubricants brand in the market.

Can you use olive oil as lube for bearings?

No, you can’t use olive oil to lubricate bearings.

Can you lube skateboard bushings?

Yes, you can lube skateboard bushings with WD40, grease, or synthetic oil. 

Final Verdict

Keep in mind; the smooth and faster riding depends on how smoothly your skate bearings move. As soon as you notice they don’t spin freely, it’s your turn to lubricate the bearings. 

We recommend the Bones Speed Cream Skate Bearing Lubricant most. It is specially formulated and designed to lube your skate bearings. Applying it, you can keep your skateboard bearings well-lubed by removing dirt, dust, and contaminants. 

But if you skate on a dirty street or ride in the water, we recommend you get the best grease for skateboard bearings. Grease-based lubricant will stay on the bearings for a long time. 

SHARE

Share on facebook
Share on pinterest
Share on twitter
Share on whatsapp
Share on linkedin
More Skating Guide
error: Content is protected !!